EPM7256AEFC100-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | unknown |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 172.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7256AEFC100-10N Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is packaged with FBGA.The device has 84inputs and outputs.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of BOTTOMand is connected to the ground.The power source is powered by 3.3Vvolts.The part is included in Programmable Logic Devices.It has 100pins programmed.If you use this device, you will also find [0].5000gates are devices that serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is adopted to store data in [0].The electronic part is mounted by Surface Mount.100pins are included in its design.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.Programmable I/Os are counted up 84.You can achieve 125MHzfrequencies.It is recommended that the operating temperature exceed 0°C.There should be a temperature below 70°Cat the time of operation.The logic block consists of 16 l logic blocks (LABs).It is recommended that the maximal frequency be lower than 172.4MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM7256AEFC100-10N Features
FBGA package
84 I/Os
100 pin count
100 pins
16 logic blocks (LABs)
EPM7256AEFC100-10N Applications
There are a lot of Altera EPM7256AEFC100-10N CPLDs applications.
- Battery operated portable devices
- State machine control
- Synchronous or asynchronous mode
- Code converters
- Software Configuration of Add-In Boards
- Software-driven hardware configuration
- Digital multiplexers
- Parity generators
- Timing control
- Complex programmable logic devices
