EPM7256AEFI100-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 172.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7256AEFI100-7 Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 84 I/O ports.The device is programmed with 100 terminations.This electrical part is wired with a terminal position of BOTTOM.An electrical supply voltage of 3.3V is used to power it.It is a part of the family [0].Bulkshould be used for packaging the chip.It has 100pins programmed.The device can also be used to find [0].A digital circuit is built using 5000gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountmounts this electronic component.A total of 100pins are provided on this board.It operates with the maximal supply voltage of 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are 84 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. You can achieve 166.67MHzfrequencies.Operating temperatures should be higher than 0°C.A temperature below 85°Cshould be used as the operating temperature.It is composed of 16 logic blocks (LABs).The maximal frequency should be lower than 172.4MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7256AEFI100-7 Features
FBGA package
84 I/Os
100 pin count
100 pins
16 logic blocks (LABs)
EPM7256AEFI100-7 Applications
There are a lot of Altera EPM7256AEFI100-7 CPLDs applications.
- High speed graphics processing
- Software-Driven Hardware Configuration
- PULSE WIDTH MODULATION (PWM)
- DDC INTERFACE
- POWER-SAVING MODES
- USB Bus
- Handheld digital devices
- Dedicated input registers
- ON-CHIP OSCILLATOR CIRCUIT
- Cross-Matrix Switch
