EPM7256AEFI100-7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | TIN SILVER COPPER |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PBGA-B100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 126.6MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7256AEFI100-7N Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the 100-LBGA package.There are 84 I/Os programmed in it.100terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 3.3Vvolts.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The MAX? 7000Aseries comprises this type of FPGA.If this device is used, you will also be able to find [0].The EPM7256shows its related parts.5000gates are used to construct digital circuits.A total of 16logic elements/blocks are present.A total of 2.5/3.33.3V power supplies are needed to run it.Supply voltage (Vsup) reaches a maximum of 3.6V.It is important that the supply voltage (Vsup) exceeds 3VV.The clock frequency should not exceed 126.6MHz.
EPM7256AEFI100-7N Features
100-LBGA package
84 I/Os
The operating temperature of -40°C~85°C TA
2.5/3.33.3V power supplies
EPM7256AEFI100-7N Applications
There are a lot of Intel EPM7256AEFI100-7N CPLDs applications.
- High speed graphics processing
- PLC analog input modules
- USB Bus
- Interface bridging
- ON-CHIP OSCILLATOR CIRCUIT
- Code converters
- Custom shift registers
- Multiple Clock Source Selection
- PULSE WIDTH MODULATION (PWM)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
