EPM7256AEQC208-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | TIN LEAD |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 164 |
| Clock Frequency | 95.2MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
EPM7256AEQC208-10 Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 208-BFQFP package containing it.There are 164 I/Os on the board.Terminations of devices are set to [0].This electrical part is wired with a terminal position of QUAD.There is 3.3V voltage supply for this device.It is a part of the family [0].Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].It is recommended that Surface Mountholds the chip in place.FPGAs belonging to the MAX? 7000Aseries contain this type of chip.It is also characterized by YES.The EPM7256can be used to identify its related parts.5000gates are used to construct digital circuits.A total of 16logic elements/blocks are present.A power supply of 2.5/3.33.3Vvolts is required to operate this device.3.6Vis the maximum supply voltage (Vsup).Vsup (supply voltage) must be greater than 3V.clock frequency should not exceed [0].
EPM7256AEQC208-10 Features
208-BFQFP package
164 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7256AEQC208-10 Applications
There are a lot of Intel EPM7256AEQC208-10 CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- Protection relays
- Digital systems
- Page register
- Cross-Matrix Switch
- State machine design
- Voltage level translation
- Handheld digital devices
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- INTERRUPT SYSTEM
