EPM7256AEQC208-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Frequency (Max) | 172.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 164 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7256AEQC208-5 Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.A PQFP package contains the item.The device has 164inputs and outputs.208terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.There is a part in the family [0].A chip with 208pins is programmed.If this device is used, you will also be able to find [0].A digital circuit can be constructed using 5000gates.The supply voltage should be maintained at 3.3V for high efficiency.In order to store data, EEPROMis used.The electronic part is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 3V.There are 164 Programmable I/Os.This frequency is 250MHz.It is recommended that the operating temperature be higher than 0°C.Temperatures should be lower than 70°C when operating.It is composed of 16 logic blocks (LABs).The maximum frequency should not exceed 172.4MHz.There is a type of programmable logic called EE PLD.
EPM7256AEQC208-5 Features
PQFP package
164 I/Os
208 pin count
208 pins
16 logic blocks (LABs)
EPM7256AEQC208-5 Applications
There are a lot of Altera EPM7256AEQC208-5 CPLDs applications.
- POWER-SAVING MODES
- Synchronous or asynchronous mode
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Dedicated input registers
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software-Driven Hardware Configuration
- PULSE WIDTH MODULATION (PWM)
- D/T registers and latches
- Programmable polarity
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
