EPM7256AETC100-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 172.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7256AETC100-10 Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is enclosed in a TQFP package.The device is programmed with 84 I/O ports.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 3.3V is used to power it.The part is included in Programmable Logic Devices.Bulkis the packaging method.It has 100pins programmed.It is also characterized by YES.5000gates are used to construct digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.This electronic part is mounted in the way of Surface Mount.The pins are [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 3VV.A total of 84Programmable I/Os are present.The frequency that can be achieved is 125MHz.It is recommended that the operating temperature be higher than 0°C.It is recommended to keep the operating temperature below 70°C.The program consists of 16 logic blocks (LABs).The maximum frequency should not exceed 172.4MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7256AETC100-10 Features
TQFP package
84 I/Os
100 pin count
100 pins
16 logic blocks (LABs)
EPM7256AETC100-10 Applications
There are a lot of Altera EPM7256AETC100-10 CPLDs applications.
- LED Lighting systems
- Address decoding
- White goods (Washing, Cold, Aircon ,...)
- Power up sequencing
- Handheld digital devices
- Protection relays
- ROM patching
- USB Bus
- Discrete logic functions
- I2C BUS INTERFACE
