EPM7256AETC100-5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | MATTE TIN (472) OVER COPPER |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 172.4MHz |
| Propagation Delay | 5.5 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7256AETC100-5N Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is contained in package [0].As you can see, this device has 84 I/O ports programmed into it.100terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 3.3V.It is a part of the family [0].It is recommended to package the chip by Tray.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.It is mounted in the way of Surface Mount.In FPGA terms, it is a type of MAX? 7000Aseries FPGA.This device also displays [0].The EPM7256indicates that its related parts can be found.For digital circuits, there are 5000gates. These devices serve as building blocks.A logic element or block has 16elements.The system runs on a power supply of 2.5/3.33.3V watts.3.6Vis the maximum supply voltage (Vsup).If the supply voltage (Vsup) is greater than 3V, then the device will work properly.Ideally, its clock frequency should not exceed 172.4MHz.
EPM7256AETC100-5N Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7256AETC100-5N Applications
There are a lot of Intel EPM7256AETC100-5N CPLDs applications.
- Voltage level translation
- Auxiliary Power Supply Isolated and Non-isolated
- Software-Driven Hardware Configuration
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Digital multiplexers
- Programmable polarity
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Power up sequencing
- Synchronous or asynchronous mode
- Timing control
