EPM7256AETC100-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 172.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7256AETC100-7 Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.TQFPis the package in which it resides.It is equipped with 84I/O ports.It is programmed that device terminations will be 100 .This electrical component has a terminal position of 0.Power is provided by a supply voltage of 3.3V volts.This part is part of the family [0].It is equipped with 100 pin count.It is also characterized by YES.For digital circuits, there are 5000gates. These devices serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended that data be stored in [0].In this case, it is mounted by Surface Mount.There are 100 pins on the device.A voltage of 3.6V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 3V.In total, there are 84programmable I/Os.You can achieve 166.67MHzfrequencies.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended that the operating temperature be below 70°C.The system consists of 16 logic blocks (LABs).The maximum frequency should not exceed 172.4MHz.Programmable logic types are divided into EE PLD.
EPM7256AETC100-7 Features
TQFP package
84 I/Os
100 pin count
100 pins
16 logic blocks (LABs)
EPM7256AETC100-7 Applications
There are a lot of Altera EPM7256AETC100-7 CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- USB Bus
- Custom shift registers
- Digital multiplexers
- Multiple Clock Source Selection
- Digital designs
- Code converters
- PULSE WIDTH MODULATION (PWM)
- Power up sequencing
- INTERRUPT SYSTEM
