EPM7256AETC144-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G144 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 120 |
| Clock Frequency | 95.2MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
EPM7256AETC144-10 Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the 144-LQFP package.There are 120 I/Os on the board.Devices are programmed with terminations of [0].The terminal position of this electrical component is QUAD.It is powered from a supply voltage of 3.3V.It is included in Programmable Logic Devices.Trayis the packaging method.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.Mount the chip by Surface Mount.This type of FPGA is a part of the MAX? 7000A series.When using this device, YEScan also be found.There are related parts in [0].A digital circuit can be constructed using 5000gates.There are 16 logic elements/blocks.A power supply of 2.5/3.33.3Vis required to operate it.A maximum supply voltage (Vsup) of 3.6V is provided.It is important that the supply voltage (Vsup) exceeds 3VV.It should not exceed 95.2MHzin its clock frequency.
EPM7256AETC144-10 Features
144-LQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7256AETC144-10 Applications
There are a lot of Intel EPM7256AETC144-10 CPLDs applications.
- Battery operated portable devices
- Power automation
- Digital multiplexers
- Address decoders
- ROM patching
- State machine control
- Digital designs
- Software-driven hardware configuration
- DDC INTERFACE
- Page register
