EPM7256AETC144-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 172.4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 172.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7256AETC144-10N Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].The device is programmed with 120 I/Os.The device is programmed with 144 terminations.Its terminal position is QUAD.The power supply voltage is 3.3V.It is a part of the family [0].There are 144 pins on the chip.This device is also capable of displaying [0].In digital circuits, there are 5000gates, which act as a basic building block.High efficiency requires a voltage supply of [0].EEPROM is adopted for storing data.This device is mounted by Surface Mount.The pins are [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.There are 36 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This can be achieved at a frequency of 172.4MHz.Ideally, the operating temperature should be greater than 0°C.It is recommended to keep the operating temperature below 70°C.There are 16 logic blocks (LABs) in its basic building block.A maximum frequency of less than 172.4MHzis recommended.A programmable logic type can be categorized as EE PLD.
EPM7256AETC144-10N Features
TQFP package
120 I/Os
144 pin count
144 pins
16 logic blocks (LABs)
EPM7256AETC144-10N Applications
There are a lot of Altera EPM7256AETC144-10N CPLDs applications.
- State machine control
- Boolean function generators
- STANDARD SERIAL INTERFACE UART
- I2C BUS INTERFACE
- Software-Driven Hardware Configuration
- Storage Cards and Storage Racks
- Interface bridging
- Handheld digital devices
- Reset swapping
- Power automation
