EPM7256BFC256-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 164 |
| Number of Logic Blocks (LABs) | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
EPM7256BFC256-5 Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the FBGA package.The device is programmed with 164 I/Os.256terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 2.5V volts.It is included in Programmable Logic Devices.Chips are programmed with 256 pins.If you use this device, you will also find [0].5000gates are used to construct digital circuits.Data is stored using [0].Surface Mountis the mounting point of this electronic part.There are 256 pins on the device.In this case, the maximum supply voltage is 3.6V.It operates with the minimal supply voltage of 3V.This device runs on 1.8/3.32.5Vvolts of electricity.A total of 164programmable I/Os are available.There is 250MHz frequency that can be achieved.It is recommended that the operating temperature be higher than 0°C.The operating temperature should be lower than 70°C.The system consists of 16 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Programmable logic types can be divided into EE PLD.
EPM7256BFC256-5 Features
FBGA package
164 I/Os
256 pin count
256 pins
1.8/3.32.5V power supplies
16 logic blocks (LABs)
EPM7256BFC256-5 Applications
There are a lot of Altera EPM7256BFC256-5 CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Multiple DIP Switch Replacement
- Boolean function generators
- Battery operated portable devices
- Digital designs
- Cross-Matrix Switch
- Parity generators
- Programmable polarity
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Programmable power management
