EPM7256BQC208-10
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.8/3.32.5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 164 |
| Clock Frequency | 94.3MHz |
| Propagation Delay | 10 ns |
| Organization | 0 DEDICATED INPUTS |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.375V~2.625V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
EPM7256BQC208-10 Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the 208-BFQFP package.It is programmed with 164 I/Os.Terminations of devices are set to [0].This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 2.5V volts.This part is in the family [0].It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].There should be a Surface Mounton the chip.The FPGA belongs to the MAX? 7000B series.If you use this device, you will also find [0].The EPM7256contains its related parts.A digital circuit can be constructed using 5000gates.In total, there are 16 logic elements/blocks.A total of 1.8/3.32.5V power supplies are needed to run it.There is a maximum supply voltage (Vsup) of 2.625V.In order to operate properly, the supply voltage (Vsup) should be greater than 2.375V.This device should not have an clock frequency greater than 94.3MHz.
EPM7256BQC208-10 Features
208-BFQFP package
164 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies
EPM7256BQC208-10 Applications
There are a lot of Intel EPM7256BQC208-10 CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- High speed graphics processing
- Field programmable gate
- ToR/Aggregation/Core Switch and Router
- Discrete logic functions
- Programmable power management
- Power automation
- DMA control
- POWER-SAVING MODES
- I2C BUS INTERFACE
