EPM7256BQC208-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 188.7MHz |
| Organization | 0 DEDICATED INPUTS |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 164 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
EPM7256BQC208-5 Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the PQFP package.208terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 2.5V is used as the power supply for this device.There is a part included in Programmable Logic Devices.Chips are programmed with 208 pins.When using this device, YESis also available.A digital circuit can be constructed using 5000gates.It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.A total of 208pins are provided on this board.It operates at a maximum supply voltage of 3.6V volts.A minimum supply voltage of 3V is required for it to operate.Currently, there are 164 Programmable I/Os available.There can be 250MHz frequency achieved.It is recommended that the operating temperature exceeds 0°C.A temperature below 70°Cshould be used as the operating temperature.In its simplest form, it consists of 16 logic blocks (LABs).It should be below 188.7MHzat the maximal frequency.Types of programmable logic are divided into EE PLD.
EPM7256BQC208-5 Features
PQFP package
208 pin count
208 pins
16 logic blocks (LABs)
EPM7256BQC208-5 Applications
There are a lot of Altera EPM7256BQC208-5 CPLDs applications.
- Power Meter SMPS
- ROM patching
- Multiple DIP Switch Replacement
- Programmable polarity
- Cross-Matrix Switch
- Dedicated input registers
- ON-CHIP OSCILLATOR CIRCUIT
- USB Bus
- Programmable power management
- Random logic replacement
