EPM7256BTC100-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 90.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7256BTC100-10 Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.In this case, there are 84 I/Os programmed.The termination of a device is set to [0].This electrical part has a terminal position of QUADand is connected to the ground.There is 2.5V voltage supply for this device.It is included in Programmable Logic Devices.Chips are programmed with 100 pins.This device is also capable of displaying [0].For digital circuits, there are 5000gates. These devices serve as building blocks.For data storage, EEPROMis adopted.Surface Mountmounts this electronic component.100pins are included in its design.A maximum voltage of 3.6Vis required for operation.The minimal supply voltage is 3V.It runs on 1.8/3.32.5Vvolts of power.There are 84 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There can be 90.9MHz frequency achieved.It is recommended that the operating temperature be higher than 0°C.A temperature less than 70°Cshould be used for operation.The program consists of 16 logic blocks (LABs).The maximal frequency should be lower than 188.7MHz.Programmable logic types are divided into EE PLD.
EPM7256BTC100-10 Features
TQFP package
84 I/Os
100 pin count
100 pins
1.8/3.32.5V power supplies
16 logic blocks (LABs)
EPM7256BTC100-10 Applications
There are a lot of Altera EPM7256BTC100-10 CPLDs applications.
- High speed graphics processing
- Field programmable gate
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Pattern recognition
- ON-CHIP OSCILLATOR CIRCUIT
- PULSE WIDTH MODULATION (PWM)
- ROM patching
- Battery operated portable devices
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Discrete logic functions
