EPM7256BTC100-10
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.8/3.32.5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 188.7MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.375V~2.625V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7256BTC100-10 Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].It is equipped with 84I/O ports.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a QUADterminal position on the electrical part in question.It is powered from a supply voltage of 2.5V.There is a part included in Programmable Logic Devices.Package the chip by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.FPGAs belonging to the MAX? 7000Bseries contain this type of chip.It is also possible to find YESwhen using this device.There are related parts in [0].A digital circuit can be constructed using 5000gates.A total of 16logic elements/blocks are present.A power supply of 1.8/3.32.5Vvolts is required to operate this device.Vsup reaches 2.625Vas the maximum supply voltage.It is recommended that the supply voltage (Vsup) be greater than 2.375V.The clock frequency of the device should not exceed 188.7MHz.
EPM7256BTC100-10 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies
EPM7256BTC100-10 Applications
There are a lot of Intel EPM7256BTC100-10 CPLDs applications.
- Storage Cards and Storage Racks
- Page register
- Power Meter SMPS
- I2C BUS INTERFACE
- Pattern recognition
- Software-driven hardware configuration
- Digital systems
- Voltage level translation
- LED Lighting systems
- Address decoders
