EPM7256BTC100-10N
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 188.7MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.375V~2.625V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000B |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.8/3.32.5V |
EPM7256BTC100-10N Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with 100-TQFP.In this case, there are 84 I/Os programmed.Terminations of devices are set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 2.5V voltage supply for this device.The part belongs to Programmable Logic Devices family.Package the chip by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.It is a type of FPGA belonging to the MAX? 7000B series.It is also characterized by YES.According to the EPM7256, its related parts can be found.In digital circuits, 5000gates serve as building blocks.There are a total of 16 logic elements or blocks.It runs on a voltage of 1.8/3.32.5Vvolts.2.625Vrepresents the maximal supply voltage (Vsup).The supply voltage (Vsup) should be greater than 2.375V.Ideally, its clock frequency should not exceed 188.7MHz.
EPM7256BTC100-10N Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies
EPM7256BTC100-10N Applications
There are a lot of Intel EPM7256BTC100-10N CPLDs applications.
- I2C BUS INTERFACE
- Bootloaders for FPGAs
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Field programmable gate
- STANDARD SERIAL INTERFACE UART
- Reset swapping
- TIMERS/COUNTERS
- DMA control
- Software-driven hardware configuration
- Software Configuration of Add-In Boards
