EPM7256BTC100-5
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.8/3.32.5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 188.7MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.375V~2.625V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7256BTC100-5 Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the 100-TQFP package.It is programmed with 84 I/Os.There are 100 terminations programmed into the device.This electrical part is wired with a terminal position of QUAD.There is 2.5V voltage supply for this device.This part is part of the family [0].As a result, it is packaged as Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.The chip should be mounted by Surface Mount.This type of FPGA is a part of the MAX? 7000B series.The device can also be used to find [0].EPM7256contains its related parts.There are 5000 gates, which are devices that acts as a building block for digital circuits. There are 16 logic elements or blocks present.It operates from 1.8/3.32.5V power supplies.Initially, the maximum supply voltage (Vsup) is 2.625V.It should be possible for Vsup to exceed 2.375Vat the supply voltage.Ideally, its clock frequency should not exceed 188.7MHz.
EPM7256BTC100-5 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies
EPM7256BTC100-5 Applications
There are a lot of Intel EPM7256BTC100-5 CPLDs applications.
- I/O PORTS (MCU MODULE)
- DMA control
- Storage Cards and Storage Racks
- ON-CHIP OSCILLATOR CIRCUIT
- State machine design
- Complex programmable logic devices
- PULSE WIDTH MODULATION (PWM)
- STANDARD SERIAL INTERFACE UART
- State machine control
- Dedicated input registers
