EPM7256BTC100-5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7256BTC100-5N Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a TQFP package.As a result, it has 84 I/O ports programmed.100terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 2.5V is used to power it.The part is included in Programmable Logic Devices.It is programmed with 100 pins.When using this device, YEScan also be found.For digital circuits, there are 5000gates. These devices serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.100pins are included in its design.A voltage of 2.625V is the maximum supply voltage for this device.Normally, it operates with a voltage of 2.375VV as its minimum supply voltage.There are 84 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There is a maximum frequency of 250MHz.The operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.There are 16logic blocks (LABs) that make up its basic building block.It is recommended that the maximal frequency be lower than 188.7MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7256BTC100-5N Features
TQFP package
84 I/Os
100 pin count
100 pins
16 logic blocks (LABs)
EPM7256BTC100-5N Applications
There are a lot of Altera EPM7256BTC100-5N CPLDs applications.
- Power automation
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- POWER-SAVING MODES
- Complex programmable logic devices
- Power up sequencing
- Configurable Addressing of I/O Boards
- Custom shift registers
- Reset swapping
- STANDARD SERIAL INTERFACE UART
- State machine control
