EPM7256BTC100-7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.8/3.32.5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 188.7MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.375V~2.625V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7256BTC100-7 Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a 100-TQFP package containing it.As you can see, this device has 84 I/O ports programmed into it.There are 100 terminations programmed into the device.This electrical part is wired with a terminal position of QUAD.Power is provided by a supply voltage of 2.5V volts.It is a part of the family [0].The chip should be packaged by Tray.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.There should be a Surface Mounton the chip.As part of the MAX? 7000Bseries, it is a type of FPGA.The device can also be used to find [0].There are related parts in [0].The 5000gates serve as building blocks for digital circuits.A total of 16logic elements/blocks are present.A power supply of 1.8/3.32.5Vvolts is required to operate this device.Supply voltage (Vsup) reaches a maximum of 2.625V.If the supply voltage (Vsup) is greater than 2.375V, then the device will work properly.It should not exceed 188.7MHzin terms of clockfrequency.
EPM7256BTC100-7 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies
EPM7256BTC100-7 Applications
There are a lot of Intel EPM7256BTC100-7 CPLDs applications.
- Code converters
- Bootloaders for FPGAs
- D/T registers and latches
- TIMERS/COUNTERS
- ON-CHIP OSCILLATOR CIRCUIT
- Dedicated input registers
- Random logic replacement
- Protection relays
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Power Meter SMPS
