EPM7256BTC100-7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7256BTC100-7N Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a TQFP package containing it.It is programmed with 84 I/Os.It is programmed that device terminations will be 100 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 2.5V is used to power it.It is a part of family [0].There are 100 pins on the chip.The device can also be used to find [0].5000gates are used to construct digital circuits.Data is stored using [0].Surface Mountis used to mount this electronic component.The pins are [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.It operates with the minimal supply voltage of 3V.Currently, it is powered by 1.8/3.32.5Vsources.A total of 84 Programmable I/Os are available.It is possible to achieve a frequency of 166.67MHz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.In its simplest form, it consists of 16 logic blocks (LABs).There should be a lower maximum frequency than 188.7MHz.It is possible to classify programmable logic as EE PLD.
EPM7256BTC100-7N Features
TQFP package
84 I/Os
100 pin count
100 pins
1.8/3.32.5V power supplies
16 logic blocks (LABs)
EPM7256BTC100-7N Applications
There are a lot of Altera EPM7256BTC100-7N CPLDs applications.
- Power Meter SMPS
- Reset swapping
- White goods (Washing, Cold, Aircon ,...)
- Digital multiplexers
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- POWER-SAVING MODES
- Boolean function generators
- Multiple DIP Switch Replacement
- Programmable power management
- Storage Cards and Storage Racks
