EPM7256BTC144-10N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
EPM7256BTC144-10N Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the TQFP package.It is equipped with 120I/O ports.The device is programmed with 144 terminations.There is a QUADterminal position on the electrical part in question.There is 2.5V voltage supply for this device.This part is part of the family [0].144pins are programmed on the chip.It is also characterized by YES.In digital circuits, there are 5000gates, which act as a basic building block.For storing data, it is recommended to use [0].Surface Mountmounts this electronic component.The device has a pinout of [0].There is a maximum supply voltage of 3.6V.It operates with the minimal supply voltage of 3V.It runs on a voltage of 1.8/3.32.5Vvolts.Programmable I/Os are counted up 36.The frequency that can be achieved is 125MHz.There should be a temperature above 0°Cat the time of operation.Temperatures should not exceed 70°C.The logic block consists of 16 l logic blocks (LABs).A maximum frequency of less than 188.7MHzis recommended.Types of programmable logic are divided into EE PLD.
EPM7256BTC144-10N Features
TQFP package
120 I/Os
144 pin count
144 pins
1.8/3.32.5V power supplies
16 logic blocks (LABs)
EPM7256BTC144-10N Applications
There are a lot of Altera EPM7256BTC144-10N CPLDs applications.
- Digital designs
- PLC analog input modules
- Digital systems
- Auxiliary Power Supply Isolated and Non-isolated
- D/T registers and latches
- Cross-Matrix Switch
- Preset swapping
- State machine design
- Battery operated portable devices
- Bootloaders for FPGAs
