EPM7256BTI100-7N
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.8/3.32.5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 188.7MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.375V~2.625V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000B |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
EPM7256BTI100-7N Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the 100-TQFPpackage, you will find it.As you can see, this device has 84 I/O ports programmed into it.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 2.5Vprovides power to the device.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Chips should be mounted by Surface Mount.FPGAs belonging to the MAX? 7000Bseries contain this type of chip.The device can also be used to find [0].You can find its related parts in the [0].There are 5000 gates, which are devices that acts as a building block for digital circuits. This logic element/block contains 16logic elements.A total of 1.8/3.32.5V power supplies are needed to run it.Vsup reaches 2.625Vas the maximum supply voltage.If the supply voltage (Vsup) is greater than 2.375V, then the device will work properly.It is recommended that the clock frequency not exceed 188.7MHz.
EPM7256BTI100-7N Features
100-TQFP package
84 I/Os
The operating temperature of -40°C~85°C TA
1.8/3.32.5V power supplies
EPM7256BTI100-7N Applications
There are a lot of Intel EPM7256BTI100-7N CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Digital multiplexers
- STANDARD SERIAL INTERFACE UART
- Random logic replacement
- Page register
- Digital systems
- Complex programmable logic devices
- D/T registers and latches
- Discrete logic functions
- Storage Cards and Storage Racks
