EPM7256EQC160-12
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 132 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 90.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 132 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
EPM7256EQC160-12 Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the PQFP package.It is programmed with 132 I/Os.There are 160 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 5Vvolts.It is a part of the family [0].It has 160pins programmed.This device can also display [0].A digital circuit is built using 5000gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.Surface Mountmounts this electronic component.A total of 160pins are provided on this board.A maximum supply voltage of 5.25Vis used in its operation.It operates with the minimal supply voltage of 4.75V.A total of 132Programmable I/Os are present.This frequency is 125MHz.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended to keep the operating temperature below 70°C.In its simplest form, it consists of 16 logic blocks (LABs).The maximal frequency should be lower than 90.9MHz.A programmable logic type is categorized as EE PLD.
EPM7256EQC160-12 Features
PQFP package
132 I/Os
160 pin count
160 pins
16 logic blocks (LABs)
EPM7256EQC160-12 Applications
There are a lot of Altera EPM7256EQC160-12 CPLDs applications.
- Multiple DIP Switch Replacement
- LED Lighting systems
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Programmable power management
- I/O expansion
- USB Bus
- High speed graphics processing
- Field programmable gate
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Parity generators
