EPM7256SQC208-10N
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 164 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
EPM7256SQC208-10N Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the 208-BFQFP package.This device has 164 I/O ports programmed into it.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 5V is used to power it.This part is part of the family [0].Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Surface Mountshould be used for mounting the chip.As part of the MAX? 7000Sseries, it is a type of FPGA.The EPM7256contains its related parts.5000gates are devices that serve as building blocks for digital circuits.This logic block consists of 16logic elements.In order for the device to operate, it requires 3.3/55V power supplies.Initially, the maximum supply voltage (Vsup) is 5.25V.In order to operate properly, the supply voltage (Vsup) should be greater than 4.75V.The clock frequency should not exceed 125MHz.
EPM7256SQC208-10N Features
208-BFQFP package
164 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7256SQC208-10N Applications
There are a lot of Intel EPM7256SQC208-10N CPLDs applications.
- Page register
- Programmable polarity
- Parity generators
- LED Lighting systems
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Multiple DIP Switch Replacement
- Code converters
- PULSE WIDTH MODULATION (PWM)
- Power up sequencing
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
