EPM7256SRC208-10N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | MATTE TIN (472) OVER COPPER |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7256 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 164 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 5000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
EPM7256SRC208-10N Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a 208-BFQFP Exposed Pad package.It is programmed with 164 I/Os.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 5V.It belongs to the family [0].Trayshould be used to package the chip.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the MAX? 7000S series.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vis also available.In accordance with the [0], its related parts are listed.It is possible to construct digital circuits using 5000gates, which are devices that serve as building blocks.There are 16 logic elements or blocks present.It runs on a voltage of 3.3/55Vvolts.Vsup reaches 5.25Vas the maximum supply voltage.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.It should not exceed 125MHzin terms of clockfrequency.
EPM7256SRC208-10N Features
208-BFQFP Exposed Pad package
164 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7256SRC208-10N Applications
There are a lot of Intel EPM7256SRC208-10N CPLDs applications.
- Power Meter SMPS
- White goods (Washing, Cold, Aircon ,...)
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ROM patching
- DDC INTERFACE
- Random logic replacement
- Pattern recognition
- Discrete logic functions
- Page register
- LED Lighting systems
