EPM7256SRI208-10N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 128.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 128.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 164 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7256SRI208-10N Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.A PQFP package contains the item.The device is programmed with 164 I/O ports.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 5V voltage supply for this device.The part is included in Programmable Logic Devices.It has 208pins programmed.As a building block for digital circuits, there are 5000gates.The supply voltage should be maintained at 5V for high efficiency.In this case, EEPROMwill be used to store the data.Surface Mountis the mounting point of this electronic part.The 208pins are designed into the board.There is a maximum supply voltage of 5.5V.It is powered by 4.5Vas its minimum supply voltage.Programmable I/Os are counted up 164.This frequency can be achieved at 128.2MHz.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 85°C.The system consists of 16 logic blocks (LABs).Maximum frequency should be less than 128.2MHz.A programmable logic type is classified as EE PLD.
EPM7256SRI208-10N Features
PQFP package
164 I/Os
208 pin count
208 pins
16 logic blocks (LABs)
EPM7256SRI208-10N Applications
There are a lot of Altera EPM7256SRI208-10N CPLDs applications.
- Preset swapping
- Wide Vin Industrial low power SMPS
- Custom state machines
- LED Lighting systems
- Auxiliary Power Supply Isolated and Non-isolated
- State machine control
- I2C BUS INTERFACE
- INTERRUPT SYSTEM
- Code converters
- Boolean function generators
