Parameters |
Mount |
Surface Mount |
Package / Case |
BGA |
Number of Pins |
256 |
Published |
1998 |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
256 |
ECCN Code |
3A991 |
Terminal Finish |
TIN SILVER COPPER |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
HTS Code |
8542.39.00.01 |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
256 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
212 |
Memory Type |
EEPROM |
Propagation Delay |
5.5 ns |
Frequency (Max) |
116.3MHz |
Programmable Logic Type |
EE PLD |
Number of Gates |
10000 |
Number of Programmable I/O |
212 |
Number of Logic Blocks (LABs) |
32 |
Output Function |
MACROCELL |
Number of Macro Cells |
512 |
Height Seated (Max) |
2.3mm |
Length |
27mm |
Width |
27mm |
RoHS Status |
RoHS Compliant |
EPM7512AEBC256-10N Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the BGA package.In this case, there are 212 I/Os programmed.There is a 256terminations set on devices.This electrical part has a terminal position of BOTTOMand is connected to the ground.An electrical supply voltage of 3.3V is used to power it.In this chip, the 256pins are programmed.10000gates are devices that serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For storing data, it is recommended to use [0].This electronic part is mounted in the way of Surface Mount.There are 256pins on it.There is a maximum supply voltage of 3.6Vwhen the device is operating.It operates with the minimal supply voltage of 3V.In total, there are 212programmable I/Os.It is recommended that the operating temperature exceed 0°C.There should be a temperature below 70°Cat the time of operation.It consists of 32 logic blocks (LABs).Maximum frequency should be less than 116.3MHz.A programmable logic type is classified as EE PLD.
EPM7512AEBC256-10N Features
BGA package
212 I/Os
256 pin count
256 pins
32 logic blocks (LABs)
EPM7512AEBC256-10N Applications
There are a lot of Altera EPM7512AEBC256-10N CPLDs applications.
- Interface bridging
- Programmable polarity
- INTERRUPT SYSTEM
- Software-driven hardware configuration
- ToR/Aggregation/Core Switch and Router
- Parity generators
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Synchronous or asynchronous mode
- I/O expansion
- Digital multiplexers