EPM7512AEBC256-12
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 256 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.3mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | RoHS Compliant |
EPM7512AEBC256-12 Overview
512 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].In this case, there are 212 I/Os programmed.The termination of a device is set to [0].The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.Power is supplied by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.It has 256pins programmed.A digital circuit is built using 10000gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For data storage, EEPROMis adopted.Surface Mountmounts this electronic component.The device has a pinout of [0].It operates at a maximum supply voltage of 3.6V volts.Despite its minimal supply voltage of [0], it is capable of operating.There are 212 Programmable I/Os.A frequency of 100MHzcan be achieved.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended that the operating temperature be below 70°C.32logic blocks (LABs) make up this circuit.A maximum frequency of less than 116.3MHzis recommended.There are several types of programmable logic that can be categorized as EE PLD.
EPM7512AEBC256-12 Features
BGA package
212 I/Os
256 pin count
256 pins
32 logic blocks (LABs)
EPM7512AEBC256-12 Applications
There are a lot of Altera EPM7512AEBC256-12 CPLDs applications.
- Cross-Matrix Switch
- State machine design
- Software-Driven Hardware Configuration
- Address decoding
- Interface bridging
- ON-CHIP OSCILLATOR CIRCUIT
- Power up sequencing
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Address decoders
- STANDARD SERIAL INTERFACE UART
