EPM7512AEFC256-12N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 1998 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7512AEFC256-12N Overview
There are 512 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a FBGA package containing it.The device is programmed with 212 I/Os.256terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 3.3Vprovides power to the device.It is a part of the family [0].Chips are programmed with 256 pins.For digital circuits, there are 10000gates. These devices serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.There are 256 pins on the device.There is a maximum supply voltage of 3.6V.A minimum supply voltage of 3V is required for it to operate.There are a total of 212 Programmable I/Os.There can be 100MHz frequency achieved.It is recommended that the operating temperature exceed 0°C.It is recommended to keep the operating temperature below 70°C.It consists of 32 logic blocks (LABs).A maximum frequency of less than 116.3MHzis recommended.Programmable logic types are divided into EE PLD.
EPM7512AEFC256-12N Features
FBGA package
212 I/Os
256 pin count
256 pins
32 logic blocks (LABs)
EPM7512AEFC256-12N Applications
There are a lot of Altera EPM7512AEFC256-12N CPLDs applications.
- Custom state machines
- Power Meter SMPS
- I/O expansion
- Field programmable gate
- USB Bus
- Programmable power management
- Multiple Clock Source Selection
- Cross-Matrix Switch
- State machine control
- Multiple DIP Switch Replacement
