EPM7512AEFC256-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7512 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 212 |
| Clock Frequency | 116.3MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 10000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
EPM7512AEFC256-7 Overview
There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 256-BGA package containing it.There are 212 I/Os programmed in it.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is provided by a supply voltage of 3.3V volts.There is a part in the family [0].Trayis the packaging method.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.FPGAs belonging to the MAX? 7000Aseries contain this type of chip.According to the EPM7512, its related parts can be found.There are 10000 gates, which are devices that acts as a building block for digital circuits. There are 32 logic elements/blocks.A total of 2.5/3.33.3V power supplies are needed to run it.Initially, the maximum supply voltage (Vsup) is 3.6V.If the supply voltage (Vsup) is greater than 3V, then the device will work properly.The clock frequency should not exceed 116.3MHz.
EPM7512AEFC256-7 Features
256-BGA package
212 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7512AEFC256-7 Applications
There are a lot of Intel EPM7512AEFC256-7 CPLDs applications.
- Field programmable gate
- Programmable power management
- Timing control
- Preset swapping
- Address decoders
- Software-Driven Hardware Configuration
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Power up sequencing
- I/O expansion
- USB Bus
