EPM7512AEFI256-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7512 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 212 |
| Clock Frequency | 87MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 10000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
EPM7512AEFI256-10N Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a 256-BGA package containing it.As you can see, this device has 212 I/O ports programmed into it.The termination of a device is set to [0].This electrical part is wired with a terminal position of BOTTOM.The power source is powered by 3.3Vvolts.This part is part of the family [0].Trayshould be used to package the chip.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Chips should be mounted by Surface Mount.This type of FPGA is a part of the MAX? 7000A series.This device also displays [0].Its related parts can be found in the [0].It is possible to construct digital circuits using 10000gates, which are devices that serve as building blocks.This logic block consists of 32logic elements.A power supply of 2.5/3.33.3Vis required to operate it.Initially, the maximum supply voltage (Vsup) is 3.6V.There should be a higher supply voltage (Vsup) than 3V.The clock frequency of this device should not exceed 87MHz.
EPM7512AEFI256-10N Features
256-BGA package
212 I/Os
The operating temperature of -40°C~85°C TA
2.5/3.33.3V power supplies
EPM7512AEFI256-10N Applications
There are a lot of Intel EPM7512AEFI256-10N CPLDs applications.
- Custom state machines
- Complex programmable logic devices
- Bootloaders for FPGAs
- Interface bridging
- Software-Driven Hardware Configuration
- Dedicated input registers
- Reset swapping
- Boolean function generators
- I/O expansion
- Address decoding
