EPM7512AEQC208-12N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 176 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 176 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7512AEQC208-12N Overview
Currently, there are 512 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].The device is programmed with 176 I/Os.It is programmed to terminate devices at [0].There is a QUADterminal position on the electrical part in question.There is 3.3V voltage supply for this device.It is a part of the family [0].It has 208pins programmed.10000gates are used to construct digital circuits.High efficiency requires the supply voltage to be maintained at [0].For data storage, EEPROMis adopted.Surface Mountis used to mount this electronic component.This board has 208 pins.A maximum voltage of 3.6Vis required for operation.It operates with the minimal supply voltage of 3V.In total, there are 176programmable I/Os.This frequency can be achieved at 100MHz.It is recommended that the operating temperature exceeds 0°C.It is recommended to keep the operating temperature below 70°C.In its simplest form, it consists of 32 logic blocks (LABs).It is recommended that the maximum frequency is less than 0.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7512AEQC208-12N Features
PQFP package
176 I/Os
208 pin count
208 pins
32 logic blocks (LABs)
EPM7512AEQC208-12N Applications
There are a lot of Altera EPM7512AEQC208-12N CPLDs applications.
- Synchronous or asynchronous mode
- I2C BUS INTERFACE
- Software-driven hardware configuration
- Parity generators
- INTERRUPT SYSTEM
- Random logic replacement
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Preset swapping
- Power automation
- Storage Cards and Storage Racks
