EPM7512AEQC208-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 176 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 176 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7512AEQC208-7 Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a PQFP package.There are 176 I/Os programmed in it.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.The power supply voltage is 3.3V.This part is included in Programmable Logic Devices.In this chip, the 208pins are programmed.10000gates are used to construct digital circuits.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.There are 208pins on it.A maximum voltage of 3.6Vis required for operation.It is powered by 3Vas its minimum supply voltage.There are 176 Programmable I/Os.There is a maximum frequency of 166.67MHz.Operating temperatures should be higher than 0°C.A temperature below 70°Cshould be used as the operating temperature.Its basic building block is composed of 32 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.A programmable logic type can be categorized as EE PLD.
EPM7512AEQC208-7 Features
PQFP package
176 I/Os
208 pin count
208 pins
32 logic blocks (LABs)
EPM7512AEQC208-7 Applications
There are a lot of Altera EPM7512AEQC208-7 CPLDs applications.
- Protection relays
- Boolean function generators
- ROM patching
- ON-CHIP OSCILLATOR CIRCUIT
- Digital multiplexers
- USB Bus
- Discrete logic functions
- Address decoding
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- I/O expansion
