Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
PQFP |
Number of Pins |
208 |
Published |
1998 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
208 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
220 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
125MHz |
Time@Peak Reflow Temperature-Max (s) |
20 |
Pin Count |
208 |
Number of Outputs |
176 |
Operating Supply Voltage |
3.3V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
176 |
Memory Type |
EEPROM |
Propagation Delay |
10 ns |
Turn On Delay Time |
10 ns |
Frequency (Max) |
116.3MHz |
Architecture |
PAL-TYPE |
Programmable Logic Type |
EE PLD |
Number of Gates |
10000 |
Number of Programmable I/O |
176 |
Number of Logic Blocks (LABs) |
32 |
Speed Grade |
10 |
Output Function |
MACROCELL |
Number of Macro Cells |
512 |
JTAG BST |
YES |
In-System Programmable |
YES |
Height Seated (Max) |
4.1mm |
Length |
28mm |
Width |
28mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
EPM7512AEQI208-10 Overview
A mobile phone network consists of 512macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 176 I/O ports.There are 208 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is provided by a supply voltage of 3.3V volts.There is a part included in Programmable Logic Devices.Chips are programmed with 208 pins.A digital circuit is built using 10000gates.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.EEPROM is adopted for storing data.This device is mounted by Surface Mount.This board has 208 pins.A maximum voltage of 3.6Vis required for operation.The device is designed to operate with a minimal supply voltage of 3VV.A total of 176programmable I/Os are available.This frequency is 125MHz.The operating temperature should be higher than -40°C.The operating temperature should be lower than 85°C.In total, it contains 32 logic blocks (LABs).The maximum frequency should not exceed 116.3MHz.In programmable logic, a type of logic can be categorized as EE PLD.There is an output of 176configured on the device.
EPM7512AEQI208-10 Features
PQFP package
176 I/Os
208 pin count
208 pins
32 logic blocks (LABs)
176 outputs
EPM7512AEQI208-10 Applications
There are a lot of Altera EPM7512AEQI208-10 CPLDs applications.
- State machine control
- Custom state machines
- Random logic replacement
- Synchronous or asynchronous mode
- Programmable polarity
- Page register
- Protection relays
- Power automation
- Bootloaders for FPGAs
- USB Bus