EPM7512AEQI208-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | EPM7512 |
| JESD-30 Code | S-PQFP-G208 |
| Number of Outputs | 176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 176 |
| Clock Frequency | 87MHz |
| Propagation Delay | 10 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 176 |
| Number of Gates | 10000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
EPM7512AEQI208-10 Overview
There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is packaged with 208-BFQFP.There are 176 I/Os programmed in it.208terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 3.3V.This part is part of the family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.It is recommended that Surface Mountholds the chip in place.The MAX? 7000Aseries comprises this type of FPGA.According to the EPM7512, its related parts can be found.In digital circuits, there are 10000gates, which act as a basic building block.32logic elements/blocks exist.It runs on 2.5/3.33.3Vvolts of power.The maximal supply voltage (Vsup) reaches 3.6V.It is recommended that the supply voltage (Vsup) be greater than 3V.clock frequency should not exceed [0].It is configured with an output of 176.176 inputs are employed.
EPM7512AEQI208-10 Features
208-BFQFP package
176 I/Os
The operating temperature of -40°C~85°C TA
2.5/3.33.3V power supplies
176 outputs
EPM7512AEQI208-10 Applications
There are a lot of Intel EPM7512AEQI208-10 CPLDs applications.
- I2C BUS INTERFACE
- Software-Driven Hardware Configuration
- Voltage level translation
- Synchronous or asynchronous mode
- Timing control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Storage Cards and Storage Racks
- Field programmable gate
- Pattern recognition
- Multiple DIP Switch Replacement
