EPM7512AEQI208-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 208 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 176 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 176 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7512AEQI208-10N Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].This device has 176 I/O ports programmed into it.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.The chip is programmed with 208 pins.10000gates are devices that serve as building blocks for digital circuits.The supply voltage should be maintained at 3.3V for high efficiency.For data storage, EEPROMis adopted.The electronic component is mounted by Surface Mount.A total of 208pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.A minimum supply voltage of 3V is required for it to operate.There are 176 Programmable I/Os.This frequency can be achieved at 125MHz.In order to operate, the temperature should be higher than -40°C.It is recommended to keep the operating temperature below 85°C.There are 32 logic blocks (LABs) in its basic building block.Maximum frequency should be less than 116.3MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM7512AEQI208-10N Features
PQFP package
176 I/Os
208 pin count
208 pins
32 logic blocks (LABs)
EPM7512AEQI208-10N Applications
There are a lot of Altera EPM7512AEQI208-10N CPLDs applications.
- Preset swapping
- High speed graphics processing
- Power Meter SMPS
- Digital multiplexers
- State machine design
- Address decoders
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software Configuration of Add-In Boards
- POWER-SAVING MODES
- Handheld digital devices
