EPM7512AETC144-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7512AETC144-10 Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a TQFP package containing it.As a result, it has 120 I/O ports programmed.There is a 144terminations set on devices.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 3.3Vprovides power to the device.It is a part of the family [0].With 144pins programmed, the chip is ready to use.10000gates are used to construct digital circuits.High efficiency requires a voltage supply of [0].EEPROM is adopted for storing data.This device is mounted by Surface Mount.A total of 44pins are provided on this board.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 3V is required for it to operate.A programmable I/O count of 36 has been recorded.There is a maximum frequency of 125MHz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be below 70°C.Its basic building block is composed of 32 logic blocks (LABs).It is recommended that the maximum frequency be less than 116.3MHz.It is possible to classify programmable logic as EE PLD.
EPM7512AETC144-10 Features
TQFP package
120 I/Os
144 pin count
44 pins
32 logic blocks (LABs)
EPM7512AETC144-10 Applications
There are a lot of Altera EPM7512AETC144-10 CPLDs applications.
- I/O expansion
- Discrete logic functions
- Custom shift registers
- DDC INTERFACE
- USB Bus
- Address decoding
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ROM patching
- Complex programmable logic devices
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
