EPM7512AETC144-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7512 |
| JESD-30 Code | S-PQFP-G144 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 120 |
| Clock Frequency | 87MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 10000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
EPM7512AETC144-10N Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with 144-LQFP.It is equipped with 120I/O ports.Terminations of devices are set to [0].Its terminal position is QUAD.The device is powered by a voltage of 3.3V volts.This part is part of the family [0].Trayis the packaging method.Ensure its reliability by operating at [0].It is recommended to mount the chip by Surface Mount.As part of the MAX? 7000Aseries, it is a type of FPGA.The EPM7512shows its related parts.The 10000gates serve as building blocks for digital circuits.This logic element/block contains 32logic elements.Currently, it is powered by 2.5/3.33.3Vsources.Initially, the maximum supply voltage (Vsup) is 3.6V.There should be a higher supply voltage (Vsup) than 3V.It should not exceed 87MHzin terms of clockfrequency.
EPM7512AETC144-10N Features
144-LQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7512AETC144-10N Applications
There are a lot of Intel EPM7512AETC144-10N CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- ROM patching
- Random logic replacement
- Configurable Addressing of I/O Boards
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- LED Lighting systems
- Dedicated input registers
- Synchronous or asynchronous mode
- Cross-Matrix Switch
- Field programmable gate
