EPM7512AETC144-12
| Parameters | |
|---|---|
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
EPM7512AETC144-12 Overview
A mobile phone network consists of 512macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.The device is programmed with 120 I/Os.The device is programmed with 144 terminations.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 3.3V volts.This part is in the family [0].A chip with 144pins is programmed.In digital circuits, there are 10000gates, which act as a basic building block.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].Surface Mountis used to mount this electronic component.The device is designed with pins [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.With a minimal supply voltage of [0], it operates.There are 36 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This frequency can be achieved at 100MHz.It is recommended that the operating temperature exceeds 0°C.A temperature lower than 70°Cis recommended for operation.The program consists of 32 logic blocks (LABs).It is recommended that the maximum frequency is less than 0.There is a type of programmable logic called EE PLD.
EPM7512AETC144-12 Features
TQFP package
120 I/Os
144 pin count
44 pins
32 logic blocks (LABs)
EPM7512AETC144-12 Applications
There are a lot of Altera EPM7512AETC144-12 CPLDs applications.
- Page register
- LED Lighting systems
- Complex programmable logic devices
- ON-CHIP OSCILLATOR CIRCUIT
- Cross-Matrix Switch
- Code converters
- Auxiliary Power Supply Isolated and Non-isolated
- USB Bus
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Battery operated portable devices
