EPM7512AETC144-12N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7512AETC144-12N Overview
512 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is contained in package [0].It is programmed with 120 I/Os.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of QUAD.There is 3.3V voltage supply for this device.The part belongs to Programmable Logic Devices family.It is programmed with 144 pins.10000gates are devices that serve as building blocks for digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].EEPROM is adopted for storing data.Surface Mountmounts this electronic component.The 144pins are designed into the board.A maximum voltage of 3.6Vis required for operation.A minimum supply voltage of 3V is required for this device to operate.There are 36 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. The frequency that can be achieved is 100MHz.There should be a temperature above 0°Cat the time of operation.It is recommended that the operating temperature be below 70°C.The program consists of 32 logic blocks (LABs).It should be below 116.3MHzat the maximal frequency.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7512AETC144-12N Features
TQFP package
120 I/Os
144 pin count
144 pins
32 logic blocks (LABs)
EPM7512AETC144-12N Applications
There are a lot of Altera EPM7512AETC144-12N CPLDs applications.
- PLC analog input modules
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- D/T registers and latches
- PULSE WIDTH MODULATION (PWM)
- Address decoding
- Pattern recognition
- DMA control
- ON-CHIP OSCILLATOR CIRCUIT
- Boolean function generators
- Programmable power management
