EPM7512AETC144-7
| Parameters | |
|---|---|
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1997 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 116.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
EPM7512AETC144-7 Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a TQFP package.In this case, there are 120 I/Os programmed.Devices are programmed with terminations of [0].This electrical component has a terminal position of 0.The power supply voltage is 3.3V.This part is in the family [0].Chips are programmed with 144 pins.As a building block for digital circuits, there are 10000gates.The supply voltage should be maintained at 3.3V for high efficiency.Data is stored using [0].The electronic part is mounted by Surface Mount.It is designed with 144 pins.There is a maximum supply voltage of 3.6Vwhen the device is operating.Despite its minimal supply voltage of [0], it is capable of operating.In total, there are 36programmable I/Os.You can achieve 166.67MHzfrequencies.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be below 70°C.32logic blocks (LABs) make up this circuit.If the maximal frequency is less than [0], it should be lower than that.There are several types of programmable logic that can be categorized as EE PLD.
EPM7512AETC144-7 Features
TQFP package
120 I/Os
144 pin count
144 pins
32 logic blocks (LABs)
EPM7512AETC144-7 Applications
There are a lot of Altera EPM7512AETC144-7 CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Power automation
- ToR/Aggregation/Core Switch and Router
- Storage Cards and Storage Racks
- Discrete logic functions
- Boolean function generators
- Programmable power management
- Timing control
- Handheld digital devices
- INTERRUPT SYSTEM
