EPM7512BBC256-10
| Parameters | |
|---|---|
| Number of Gates | 10000 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.7mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 163.9MHz |
| Programmable Logic Type | EE PLD |
EPM7512BBC256-10 Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a BGA package.There are 212 I/Os programmed in it.There are 256 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 2.5Vprovides power to the device.This part is part of the family [0].It is recommended that the chip be packaged by Bulk.It is equipped with 256 pin count.It is also characterized by YES.For digital circuits, there are 10000gates. These devices serve as building blocks.The supply voltage should be maintained at 3.3V for high efficiency.It is adopted to store data in [0].In this case, it is mounted by Surface Mount.There are 256pins on it.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 3V is required for it to operate.This device runs on 1.8/3.32.5Vvolts of electricity.A total of 212 Programmable I/Os are available.This frequency can be achieved at 125MHz.It is recommended that the operating temperature exceeds 0°C.There should be a temperature below 70°Cat the time of operation.There are 32 logic blocks (LABs) in its basic building block.If the maximal frequency is less than [0], it should be lower than that.A programmable logic type can be categorized as EE PLD.
EPM7512BBC256-10 Features
BGA package
212 I/Os
256 pin count
256 pins
1.8/3.32.5V power supplies
32 logic blocks (LABs)
EPM7512BBC256-10 Applications
There are a lot of Altera EPM7512BBC256-10 CPLDs applications.
- Protection relays
- Power Meter SMPS
- USB Bus
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Interface bridging
- Power up sequencing
- Parity generators
- Digital designs
- I2C BUS INTERFACE
- Power automation
