EPM7512BFC256-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 163.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.8mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7512BFC256-10 Overview
This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the FBGA package.In this case, there are 212 I/Os programmed.Devices are programmed with terminations of [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 2.5V volts.This part is part of the family [0].A chip with 256pins is programmed.The device can also be used to find [0].The 10000gates serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 256 pins.There is a maximum supply voltage of 2.625V.It operates with the minimal supply voltage of 2.375V.There are 212 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. A frequency of 125MHzcan be achieved.Operating temperatures should be higher than 0°C.Ideally, the operating temperature should be below 70°C.There are 32 logic blocks (LABs) in its basic building block.Maximum frequency should be less than 163.9MHz.This kind of FPGA is composed of EE PLD.
EPM7512BFC256-10 Features
FBGA package
212 I/Os
256 pin count
256 pins
32 logic blocks (LABs)
EPM7512BFC256-10 Applications
There are a lot of Altera EPM7512BFC256-10 CPLDs applications.
- Field programmable gate
- Preset swapping
- Address decoding
- Bootloaders for FPGAs
- Digital systems
- Portable digital devices
- PULSE WIDTH MODULATION (PWM)
- Voltage level translation
- Software-Driven Hardware Configuration
- LED Lighting systems
