EPM7512BFC256-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 1998 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Frequency (Max) | 163.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7512BFC256-7N Overview
512macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is part of the FBGA package.It is equipped with 212I/O ports.The device is programmed with 256 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 2.5V is used as the power supply for this device.It is a part of the family [0].It has 256pins programmed.The device can also be used to find [0].In digital circuits, 10000gates serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.256pins are included in its design.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 3V.This device runs on 1.8/3.32.5Vvolts of electricity.A total of 212Programmable I/Os are present.This frequency can be achieved at 166.67MHz.It is recommended that the operating temperature exceeds 0°C.There should be a temperature below 70°Cat the time of operation.The logic block consists of 32 l logic blocks (LABs).The maximal frequency should be lower than 163.9MHz.Programmable logic types are divided into EE PLD.
EPM7512BFC256-7N Features
FBGA package
212 I/Os
256 pin count
256 pins
1.8/3.32.5V power supplies
32 logic blocks (LABs)
EPM7512BFC256-7N Applications
There are a lot of Altera EPM7512BFC256-7N CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Multiple DIP Switch Replacement
- Digital multiplexers
- I2C BUS INTERFACE
- Bootloaders for FPGAs
- Protection relays
- State machine control
- Battery operated portable devices
- ROM patching
- LED Lighting systems
