EPM7512BTC144-10
| Parameters | |
|---|---|
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 163.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | TQFP |
EPM7512BTC144-10 Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the TQFP package.The device is programmed with 120 I/Os.144terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 2.5V volts.The part is included in Programmable Logic Devices.There are 144pins on the chip.It is also possible to find YESwhen using this device.10000gates are used to construct digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.It is mounted by Surface Mount.It is designed with 144 pins.In this case, the maximum supply voltage is 2.625V.With a minimal supply voltage of [0], it operates.There are 36 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. You can achieve 125MHzfrequencies.It is recommended that the operating temperature exceeds 0°C.It is recommended that the operating temperature be below 70°C.The logic block consists of 32 l logic blocks (LABs).It should be below 163.9MHzat the maximal frequency.Programmable logic types are divided into EE PLD.
EPM7512BTC144-10 Features
TQFP package
120 I/Os
144 pin count
144 pins
32 logic blocks (LABs)
EPM7512BTC144-10 Applications
There are a lot of Altera EPM7512BTC144-10 CPLDs applications.
- Bootloaders for FPGAs
- Interface bridging
- Reset swapping
- Power automation
- Synchronous or asynchronous mode
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Code converters
- State machine design
- ON-CHIP OSCILLATOR CIRCUIT
- Voltage level translation
