EPM7512BUC169-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 160 |
| Published | 2014 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 169 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 169 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 141 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 163.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.55mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7512BUC169-10 Overview
A mobile phone network consists of 512macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the BGA package.It is equipped with 141I/O ports.169terminations have been programmed into the device.The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.The power source is powered by 2.5Vvolts.It is a part of family [0].The chip is programmed with 169 pins.It is also possible to find YESwhen using this device.10000gates are devices that serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.A Surface Mountis mounted on this electronic component.The device is designed with pins [0].A maximum supply voltage of 3.6Vis used in its operation.A minimum supply voltage of 3V is required for it to operate.It runs on 1.8/3.32.5Vvolts of power.A total of 100 Programmable I/Os are available.A frequency of 125MHzcan be achieved.It is recommended that the operating temperature be greater than 0°C.Temperatures should not exceed 70°C.The system consists of 32 logic blocks (LABs).It is recommended that the maximal frequency be lower than 163.9MHz.It is possible to classify programmable logic as EE PLD.
EPM7512BUC169-10 Features
BGA package
141 I/Os
169 pin count
160 pins
1.8/3.32.5V power supplies
32 logic blocks (LABs)
EPM7512BUC169-10 Applications
There are a lot of Altera EPM7512BUC169-10 CPLDs applications.
- DDC INTERFACE
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Software Configuration of Add-In Boards
- Field programmable gate
- TIMERS/COUNTERS
- Wide Vin Industrial low power SMPS
- Handheld digital devices
- PULSE WIDTH MODULATION (PWM)
- ON-CHIP OSCILLATOR CIRCUIT
- Reset swapping
