EPM7512BUC169-5
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 160 |
| Published | 2014 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 169 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 169 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 141 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Frequency (Max) | 163.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.55mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7512BUC169-5 Overview
Currently, there are 512 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with BGA.In this case, there are 141 I/Os programmed.The device is programmed with 169 terminations.This electrical component has a terminal position of 0.A voltage of 2.5Vprovides power to the device.It belongs to the family [0].It is equipped with 169 pin count.If you use this device, you will also find [0].There are 10000 gates, which are devices that acts as a building block for digital circuits. In order to maintain high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountmounts this electronic component.There are 160 pins on the device.This device operates at a voltage of 3.6Vas its maximum supply voltage.It is powered by 3Vas its minimum supply voltage.It operates from 1.8/3.32.5V power supplies.In total, there are 100programmable I/Os.This frequency can be achieved at 166.67MHz.In order to operate, the temperature should be higher than 0°C.A temperature less than 70°Cshould be used for operation.There are 32logic blocks (LABs) that make up its basic building block.It is recommended that the maximum frequency be less than 163.9MHz.Types of programmable logic are divided into EE PLD.
EPM7512BUC169-5 Features
BGA package
141 I/Os
169 pin count
160 pins
1.8/3.32.5V power supplies
32 logic blocks (LABs)
EPM7512BUC169-5 Applications
There are a lot of Altera EPM7512BUC169-5 CPLDs applications.
- Storage Cards and Storage Racks
- Synchronous or asynchronous mode
- Programmable polarity
- Voltage level translation
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Code converters
- PULSE WIDTH MODULATION (PWM)
- Protection relays
- Page register
- Reset swapping
