EPM7512BUC169-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 169 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 169 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 169 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 141 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 163.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 10000 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 32 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.55mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7512BUC169-7 Overview
There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The product is contained in a BGA package.The device is programmed with 141 I/O ports.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of BOTTOM.It is powered by a voltage of 2.5V volts.It is a part of the family [0].It is programmed with 169 pins.This device also displays [0].A digital circuit is built using 10000gates.In this case, EEPROMwill be used to store the data.This device is mounted by Surface Mount.This board has 169 pins.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Initially, it requires a voltage of 3Vas the minimum supply voltage.A total of 1.8/3.32.5V power supplies are needed to run it.A total of 100 Programmable I/Os are available.You can achieve 166.67MHzfrequencies.Ideally, the operating temperature should be greater than 0°C.A temperature less than 70°Cshould be used for operation.32logic blocks (LABs) make up this circuit.If the maximal frequency is less than [0], it should be lower than that.It is possible to classify programmable logic as EE PLD.
EPM7512BUC169-7 Features
BGA package
141 I/Os
169 pin count
169 pins
1.8/3.32.5V power supplies
32 logic blocks (LABs)
EPM7512BUC169-7 Applications
There are a lot of Altera EPM7512BUC169-7 CPLDs applications.
- Address decoders
- Multiple Clock Source Selection
- ON-CHIP OSCILLATOR CIRCUIT
- Voltage level translation
- Power up sequencing
- I/O expansion
- Address decoding
- State machine control
- Software Configuration of Add-In Boards
- INTERRUPT SYSTEM
