EPM9320LC84-20
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1994 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 84 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 106mA |
| Number of I/O | 60 |
| Nominal Supply Current | 106mA |
| Memory Type | EEPROM |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 23 ns |
| Frequency (Max) | 144MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 6000 |
| Number of Programmable I/O | 60 |
| Number of Logic Blocks (LABs) | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 320 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 5.08mm |
| Length | 29.3116mm |
| Width | 29.3116mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM9320LC84-20 Overview
There are 320 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.PLCCis the package in which it resides.The device is programmed with 60 I/Os.84terminations have been programmed into the device.QUADis the terminal position of this electrical part.Power is supplied by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.It is equipped with 84 pin count.It is possible to construct digital circuits using 6000gates, which are devices that serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.There are 84 pins embedded in the device.There is a maximum supply voltage of 5.25Vwhen the device is operating.The minimal supply voltage is 4.75V.A programmable I/O count of 60 has been recorded.Operating temperatures should be higher than 0°C.Temperatures should not exceed 70°C.The logic block consists of 20 l logic blocks (LABs).There should be a lower maximum frequency than 144MHz.Types of programmable logic are divided into EE PLD.
EPM9320LC84-20 Features
PLCC package
60 I/Os
84 pin count
84 pins
20 logic blocks (LABs)
EPM9320LC84-20 Applications
There are a lot of Altera EPM9320LC84-20 CPLDs applications.
- Configurable Addressing of I/O Boards
- STANDARD SERIAL INTERFACE UART
- Timing control
- Programmable polarity
- Boolean function generators
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Complex programmable logic devices
- Multiple DIP Switch Replacement
- Auxiliary Power Supply Isolated and Non-isolated
- Page register
