EPM9320LI84-20
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1994 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 106mA |
| Number of I/O | 60 |
| Nominal Supply Current | 106mA |
| Memory Type | EEPROM |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 23 ns |
| Frequency (Max) | 144MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 6000 |
| Number of Programmable I/O | 60 |
| Number of Logic Blocks (LABs) | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 320 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 5.08mm |
| Length | 29.3116mm |
| Width | 29.3116mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM9320LI84-20 Overview
There are 320 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is packaged with PLCC.There are 60 I/Os programmed in it.There are 84 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.A voltage of 5Vprovides power to the device.This part is included in Programmable Logic Devices.84pins are programmed on the chip.As a building block for digital circuits, there are 6000gates.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].It is mounted by Surface Mount.The device has a pinout of [0].In this case, the maximum supply voltage is 5.5V.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.A total of 60programmable I/Os are available.Ideally, the operating temperature should be greater than -40°C.A temperature less than 85°Cshould be used for operation.There are 20logic blocks (LABs) that make up its basic building block.Maximum frequency should be less than 144MHz.A programmable logic type is classified as EE PLD.
EPM9320LI84-20 Features
PLCC package
60 I/Os
84 pin count
84 pins
20 logic blocks (LABs)
EPM9320LI84-20 Applications
There are a lot of Altera EPM9320LI84-20 CPLDs applications.
- LED Lighting systems
- ROM patching
- I/O PORTS (MCU MODULE)
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- TIMERS/COUNTERS
- Multiple Clock Source Selection
- Pattern recognition
- High speed graphics processing
- Digital multiplexers
